Service Registration is Missing or Corrupt на Windows 7/10 как исправить
Пользователи операционных систем Windows 7 и 10 могут столкнуться с невозможностью установки обновлений для своей операционной системы, что сопровождается сообщением «Service Registration is Missing or Corrupt». В этом материале я расскажу, что это за проблема Service Registration is Missing на Виндовс, почему она возникает, и как исправить.
Что такое Service Registration is Missing or Corrupt?
Для понимания того, как исправить проблему Service Registration is Missing or Corrupt, необходимо прежде всего определиться с переводом данного сообщения. В переводе с английского это предложение звучит как «Регистрация сервиса отсутствует или повреждена», и связано это в первую очередь с проблемами в работе некоторых сервисов (служб) ОС Windows, а также с проблемами в работе установщика обновлений для вашей операционной системы.
Указанная ошибка возникает весьма регулярно, и особенно часто на неё жалуются пользователи модерной ОС Windows 10. При этом из-за возникновения ошибки Service Registration пользователь не способен установить ни одно из обновлений, необходимых для работы операционной системы.
Причины возникновения ошибки «Регистрация службы отсутствует или повреждена»
Чтобы избавиться от ошибки Service Registration is Missing or Corrupt, необходимо определиться с причинами, которые вызывают данную дисфункцию. Они таковы:
- Пиратская (нелицензионная) версия ОС Windows;
- Злокачественная деятельность вирусных программ;
- Повреждение реестра ОС вследствие разнообразных причин;
- Сбой в работе операционной системы.
После того, как мы определились с причинами данной ошибки, необходимо определиться и с методами, которые помогут исправить проблему «Регистрация сервиса отсутствует или повреждена».
Как исправить ошибку Service Registration is Missing
Так, как пофиксить ошибку Service Registration is Missing or Corrupt? Рекомендую выполнить следующее:
- Восстановите работу служб обновления ОС Windows. Нажмите сочетание клавиш Win+R, и введите в строке services.msc. Перед вами откроется список служб, дважды кликните на каждую службу из списка, предложенного мною ниже, поставьте в каждой тип запуска «Автоматически» (не перепутайте с «Автоматически с отложенным запуском») и если служба была остановлена, кликните на ней правой клавишей мыши и выберите «Запустить».
- Фоновая интеллектуальная служба передачи (Background Intelligent Transfery System);
- Служба криптографии (Cryptographic Service);
- Центр обновления Windows (Windows Update).
После перезапуска каждой из данных служб перезагрузите ваш компьютер.
- Используйте специальные команды для восстановления. Запустите командную строку от имени администратора (нажмите на «Пуск», в строке поиска введите «Командная строка», вверху кликните правой кнопкой на полученный результат и выберите в меню справа «Запуск от имени администратора»). Затем последовательно набирайте каждую из команд и подтверждайте выполнение, нажимая на ввод:
net stop msiserver
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old
net start wuauserv
net start cryptSvc
net start msiserver
После последовательного выполнения всех команд подождите пару секунд, а затем перезагрузите ваш ПК, возможно вопрос как избавиться от ошибки Service Registration is Missing будет решён.
- Проверьте целостность системных файлов с помощью утилиты sfc. Вновь откройте командную строку от имени администратора (как описано выше), и введите sfc /scannow, а затем нажмите ввод;
- Проверьте систему на наличие вирусных программ. Помогут такие антивирусные инструменты как Dr.Web CureIt!, Malware Anti-Malware, Kaspersky Removal Tool и другие;
- Откатите систему к предыдущей точке восстановления, когда проблемы не наблюдалось.
Заключение
Выше мной был рассмотрен вопрос как устранить ошибку Service Registration is Missing or Corrupt в Windows 10 и более ранней 7. В большинстве случаев необходимо перезапустить соответствующие службы, а также поочерёдно выполнить весь список команд, указанных выше. В абсолютном большинстве случаев перечисленные мной инструменты являются эффективным средством для исправления данной проблемы и помогут наладить нормальную работу служб обновления ОС Windows.
Восстановление реестра в Windows 7
Реестр представляет собой огромное хранилище данных, в котором располагаются всевозможные параметры, позволяющие стабильно работать ОС Виндовс 7. При внесении некорректных изменений в системную базу данных или повреждении каких-либо секторов реестра (например, при спонтанном выключении Вашего компьютера) возможно появление разного рода неисправностей в работе системы. В данном материале разберемся, как восстановить системную базу данных.
Восстанавливаем реестр
Сбои в работе ПК возможны и после установки программных решений, которые требуют совершения изменений в системной базе данных. Также бывают ситуации, когда юзер случайно удаляет целый подраздел реестра, что приводит к нестабильной работе ПК. Чтобы устранить подобные проблемы, необходимо произвести восстановление реестра. Рассмотрим, как это можно сделать.
Способ 1: Восстановление системы
Проверенный временем метод устранения неполадок в реестре — это восстановление системы, он подойдет, если у вас имеется точка восстановления. Также стоит отметить, что будут удалены различные данные, которые были сохранены недавно.
- Для совершения данной операции переходим в меню «Пуск» и перемещаемся во вкладку «Стандартные», в ней открываем «Служебные» и кликаем по надписи «Восстановление системы».
В открывшемся окошке ставим точку в варианте «Рекомендуемое восстановление» или выбираем дату самостоятельно, указав пункт «Выбрать другую точку восстановления». Необходимо указать дату, когда не было проблем с реестром. Жмём по кнопочке «Далее».
После данной процедуры произойдет процесс восстановления системной базы данных.
Способ 2: Обновление системы
Для выполнения данного метода понадобится загрузочная флешка или диск.
Вставив диск для установки (или флеш-накопитель), запускаем установочную программу Виндовс 7. Запуск производится из системы, которая находится в работающем состоянии.
Произойдет перезапись системной директории Виндовс 7 (в ней располагается реестр), настройки пользователя и конфиденциальные личные параметры окажутся нетронутыми.
Способ 3: Восстановление на этапе загрузки
- Производим загрузку системы с диска для установки или загрузочной флешки (урок по созданию такого носителя был приведен в предыдущем способе). Настраиваем BIOS так, чтобы загрузка производилась с флеш-накопителя или привода CD/DVD (устанавливаем в пункте «First Boot Device» параметр «USB-HDD» или «СDROM»).
Производим перезапуск ПК, сохранив настройки БИОС. После появление экрана с надписью «Press any key to boot from CD or DVD…» жмём Enter.
Ожидаем загрузку файлов.
Выбираем необходимый язык и жмём по кнопочке «Далее».
Нажимаем по кнопке «Восстановление системы».
В представленном перечне выбираем «Восстановления запуска».
Есть вероятность, что «Восстановление запуска» не поможет исправить неполадку, тогда останавливаем выбор на подпункте «Восстановление системы».
Способ 4: «Командная строка»
Выполняем процедуры, которые были описаны в третьем способе, только вместо восстановления кликаем по подпункту «Командная строка».
- В «Командной строке» набираем команды и жмём Enter.
После вводим команду MD Temp и щелкаем по клавише Enter.
Производим создание резервных копий файлов, выполнив определенные команды и нажав Enter после их ввода.
сopy BCD-Template Temp
copy COMPONENTS Temp
copy SECURITY Temp
copy SOFTWARE Temp
copy SYSTEM Temp
Поочередно набираем и жмем Enter.
ren BCD-Template BCD-Template.bak
ren COMPONENTS COMPONENTS.bak
ren DEFAULT DEFAULT.bak
ren SOFTWARE SOFTWARE.bak
ren SECURTY SECURITY.bak
ren SYSTEM SYSTEM.bak
И завершающий перечень команд (не забываем нажимать Enter после каждой).
copy C:\Windows\System32\Config\Regback\BCD-Template C:\Windows\System32\Config\BCD-Template
copy C:\Windows\System32\Config\Regback\COMPONENTS C:\Windows\System32\Config\COMPONENTS
copy C:\Windows\System32\Config\Regback\DEFAULT C:\Windows\System32\Config\DEFAULT
copy C:\Windows\System32\Config\Regback\SAM C:\Windows\System32\Config\SAM
copy C:\Windows\System32\Config\Regback\SECURITY C:\Windows\System32\Config\SECURITY
copy C:\Windows\System32\Config\Regback\SOFTWARE C:\Windows\System32\Config\SOFTWARE
copy C:\Windows\System32\Config\Regback\SYSTEM C:\Windows\System32\Config\SYSTEM
Вводим Exit и жмём Enter, произойдет перезапуск системы. При условии, что всё было сделано правильно, Вы должны наблюдать подобный экран.
Способ 5: Восстановление реестра из резервной копии
Эта методика подойдет для пользователей, которые имеют резервную копию реестра, созданную через «Файл» – «Экспорт».
Итак, если у Вас имеется данная копия, выполняем следующие действия.
- Нажав сочетание клавиш Win+R, открываем окошко «Выполнить». Набираем regedit и жмём «ОК».
Щелкаем по вкладке «Файл» и выбираем «Импорт».
В открывшемся проводнике находим копию, которую создали ранее для резерва. Жмём «Открыть».
Дожидаемся копирования файлов.
После того, как файлы скопировались, реестр будет восстановлен в рабочее состояние.
Применяя данные методы, Вы сможете произвести процесс восстановления реестра в рабочее состояние. Также хочется отметить, что время от времени необходимо создавать точки восстановления и резервные копии реестра.
help! lady newbie windows 7 corrupt registry won’t boot up
Toshiba Satellite L505D-S5965. Originally loaded with Vista Home, upgraded to Windows 7
Today the computer shutdown and restarted running the Startup Repair console.
Problem Signature
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21201049
Problem Signature 05: AutoFailover
Problem Signature 06: 7
Problem Signature 07: CorruptRegistry
OS Version: 6.1.7600.2.0.0.256.1
please help, i’m not terribly web savvy
i can get into the f8 screen on start up but can’t get to safe mode, just keeps going to startup repair that «cannot repair automatically»
should i delete *.*? the windows disc doesn’t do anything to help and i don’t know what else to do!
Replies (13)
* Please try a lower page number.
* Please enter only numbers.
* Please try a lower page number.
* Please enter only numbers.
Did this solve your problem?
Sorry this didn’t help.
Great! Thanks for marking this as the answer.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this response?
Thanks for your feedback.
thanks so much, i did manage to set the system disc to be the boot source, but it says that there is no system restore point (also tried image — no image), and I’ve tried every repair setting in the book — all loop back. at the moment, i’ve managed to get to dos and not sure if i should just delete *.*, as the windows 7 disc or anything else I try (old windows ) won’t work!
apart from losing my files which i’d hate, there would also be drama with device drivers, etc, but i can’t think what else to do.
1 person was helped by this reply
Did this solve your problem?
Sorry this didn’t help.
Great! Thanks for marking this as the answer.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this response?
Thanks for your feedback.
Your data is safe. When you boot into Repair Mode then you can select the Command Prompt (the facility that you call «DOS», then use console commands to safe your data files to an external storage unit, e.g. a flash drive. You need to ask a computer-savvy friend to assist you if you have no experience with such commands.
This would also be an excellent opportunity to review your backup strategy. If you keep important or irreplaceable files on your disk then youmust back them up to an external backup device at regular intervals.
To solve your current problem you could restore your registry files manually to an earlier point by going through the steps outlined below. The process is involved and requires some careful typing. Ask a computer-savvy friend to assist you if you lack experience in this area. Note that it may reset your password to an earlier value.
1. Keep tapping F8 during the early boot phase.
2. Select Repair from the menu.
3. Log on as Administrator if prompted.
4. Select Repair when prompted.
5. Select the Command Prompt.
6. Identify the correct drive letter for your Windows installation. It could be a drive other than C: but it won’t be X:. You do it by typing the commands
dir C:\Win*
dir D:\Win*
dir E:\Win*
until you find the Windows folder.
I will call that drive «Q:».
7. Type these commands:
cd /d Q:\windows\System32\config
xcopy *.* Q:\MyRegBack\
cd MyRegBack
dir
8. Examine the dates of the Software, System and SAM files. Were the files created before or after your problem became apparent?
9. If they were made before the problem became apparent then you can type these commands:
copy /y software ..
copy /y System ..
copy /y Sam ..
(the two dots are part of each command)
10. Reboot normally. If things do not work out then you can backtrack by copying the original registry files from Q:\MyRegBack to Q:\Windows\System32\config.
Did this solve your problem?
Sorry this didn’t help.
Great! Thanks for marking this as the answer.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this response?
Thanks for your feedback.
thank you so much, i will do this tomorrow when i am not so tired and can do it carefully! i do back up photos and some files, but not in the last week where i’ve been doing quite a lot of work and haven’t backed that up (dummy!!)
i’ll let you know how i go tomorrow, and thanks once again!
by the way, it was X:\windows\system32
Did this solve your problem?
Sorry this didn’t help.
Great! Thanks for marking this as the answer.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this response?
Thanks for your feedback.
hi again, well, i did all that but it still wont start up
when i go to command, it is already on
but it won’t open a MyRegBack — says cannot find file path spec
should i give up and wipe the system? really all i wanted was my emails but don’t know how to copy anything — i miss my big laptop!
Did this solve your problem?
Sorry this didn’t help.
Great! Thanks for marking this as the answer.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this response?
Thanks for your feedback.
Since your system would not start up before and won’t start up now, there is little point in restoring the registry to its previous state. You probably have to wipe your system and start all over again. Here are a few options to back up your personal file (including your EMail files):
a) Perform Steps 1 . . 5 of my previous set of instructions, then use console commands to back up your files to an external medium.
b) Boot the machine with an Ubuntu boot CD (http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windows-computer/) and use its GUI to save your files. Note that downloading the Ubuntu CD image of 720 MBytes can take a long time.
c) Remove the hard disk, put it into an external USB case, then connect the case to some other Windows PC.
Did this solve your problem?
Sorry this didn’t help.
Great! Thanks for marking this as the answer.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this response?
Thanks for your feedback.
i did it all, and thought i’d backed up onto an external drive named F:, however when i looked later, nothing was there. Argh!
did a Toshiba restore which kept Vista on but now the DVD player won’t read the windows discs and can’t find a way to download windows with the product key. Strange, the comp can see the Drive, but the discs just spin and it says insert disc!
Did this solve your problem?
Sorry this didn’t help.
Great! Thanks for marking this as the answer.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this response?
Thanks for your feedback.
There are three possible causes for your inability to read the Windows DVD, listed in order of probability:
a) Marginal or damaged DVD.
b) Marginal DVD drive.
c) A problem with Windows.
You could boot the machine with an Ubuntu CD as described before, then copy the DVD to your hard disk. If this works then you know that c) Windows is responsible.
Did this solve your problem?
Sorry this didn’t help.
Great! Thanks for marking this as the answer.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this response?
Thanks for your feedback.
Your data is safe. When you boot into Repair Mode then you can select the Command Prompt (the facility that you call «DOS», then use console commands to safe your data files to an external storage unit, e.g. a flash drive. You need to ask a computer-savvy friend to assist you if you have no experience with such commands.
This would also be an excellent opportunity to review your backup strategy. If you keep important or irreplaceable files on your disk then youmust back them up to an external backup device at regular intervals.
To solve your current problem you could restore your registry files manually to an earlier point by going through the steps outlined below. The process is involved and requires some careful typing. Ask a computer-savvy friend to assist you if you lack experience in this area. Note that it may reset your password to an earlier value.
1. Keep tapping F8 during the early boot phase.
2. Select Repair from the menu.
3. Log on as Administrator if prompted.
4. Select Repair when prompted.
5. Select the Command Prompt.
6. Identify the correct drive letter for your Windows installation. It could be a drive other than C: but it won’t be X:. You do it by typing the commands
dir C:\Win*
dir D:\Win*
dir E:\Win*
until you find the Windows folder.
I will call that drive «Q:».
7. Type these commands:
cd /d Q:\windows\System32\config
xcopy *.* Q:\MyRegBack\
cd MyRegBack
dir
8. Examine the dates of the Software, System and SAM files. Were the files created before or after your problem became apparent?
9. If they were made before the problem became apparent then you can type these commands:
copy /y software ..
copy /y System ..
copy /y Sam ..
(the two dots are part of each command)
10. Reboot normally. If things do not work out then you can backtrack by copying the original registry files from Q:\MyRegBack to Q:\Windows\System32\config.
I have an Acer Aspire laptop with Windows 7. After it updated the OS on two consecutive days, it froze. After cold start it never wanted to boot again. Troubleshooting shows one root cause:
Registry is corrupt
Repair action : registry roll back
I have read alot about possible solutions to the problem, including repair options with F8. Nothing works. It keeps going back to repair recommendations. I now have about 3 repair attempts.
I however did not use the last attemp on the list which is to do a back up of my data and reload the software.
1. I don’t know how to do a backup on flash in command prompt.
2. Unfortunately I do not have any boot or repair disc with me.
3. I’m currently in China for the next two more weeks which is very far from my home country.
4. I wanted to wait till I get home to get professional IT help but I urgently need to finish some work while I am in China.
If I follow the steps above, will my data and software still be safe? What exactly does step 7 do?