HP Device Toolbox (Windows) Laserjet printer HP Серия МФП HP Color LaserJet Pro MFP M176
HP Device Toolbox (Windows)
Use the HP Device Toolbox for Windows to check product status or to view or change product settings from
your computer. This tool opens the HP Embedded Web Server for the product.
This tool is available only if you performed a full installation when you installed the product.
Depending on how the product is connected, some features might not be available.
Click the Start button, and then click the Programs item.
Click your HP product group, and then click the HP Device Toolbox item.
Provides product, status, and
configuration information.
Device Status: Shows the product status and shows the approximate percent life
remaining of HP supplies.
Supplies Status: Shows the approximate percent life remaining of HP supplies. Actual
supply life remaining can vary. Consider having a replacement supply available to install
when print quality is no longer acceptable. The supply does not need to be replaced
unless the print quality is no longer acceptable.
Device Configuration: Shows the information found on the product configuration page.
Network Summary: Shows the information found on the product network configuration
Reports: Print the configuration and supplies status pages that the product generates.
Event Log: Shows a list of all product events and errors.
Provides the ability to configure the
product from your computer.
Device Information: Provides basic product and company information.
Paper Setup: Change the default paper-handling settings for the product.
Print Quality: Change the default print-quality settings for the product.
EcoSMART Console: Change the default times for entering Sleep mode or Auto Power
Down mode. Configure which events cause the product to wake.
Paper Types: Configure print modes that correspond to the paper types that the product
accepts.
System Setup: Change the system defaults for the product.
Service: Perform the cleaning procedure on the product.
Save and Restore: Save the current settings for the product to a file on the computer. Use
this file to load the same settings onto another product or to restore these settings to
this product at a later time.
Administration: Set or change the product password. Enable or disable product features.
The System tab can be password-protected. If this product is on a network, always
consult with the administrator before changing settings on this tab.
Provides the ability to change default
print settings from your computer.
Printing: Change the default product print settings, such as number of copies and paper
orientation. These are the same options that are available on the control panel.
Дополнительная настройка со встроенным веб, Сервером hp (ews) и hp device toolbox, Windows) – Инструкция по эксплуатации HP Серия МФП HP Color LaserJet Pro MFP M476
Страница 92
Дополнительная настройка со встроенным веб
HP (EWS) и HP Device Toolbox (Windows)
-сервер HP позволяет управлять функциями печати с компьютера без
необходимости в использовании панели управления принтера
Просмотр информации о состоянии устройства
Определение оставшихся ресурсов всех расходных материалов и заказ новых
Просмотр и изменение конфигурации лотков
Просмотр и изменение конфигурации меню панели управления устройства
Просмотр и печать внутренних страниц
Получение уведомлений о событиях устройства и расходных материалов
Просматривать и изменять настройку сети
-сервер HP функционирует при подключении устройства к IP-сети. Он не
поддерживает соединения по протоколам
, созданным на базе IPX . Для открытия и
использования встроенного веб
-сервера HP доступ в Интернет не требуется.
При подключении принтера к сети доступ к встроенному
Web-серверу HP обеспечивается
HP Device Toolbox доступен только в том случае, если была выполнены полная
. Некоторые функции могут быть недоступны в зависимости от того, как
-сервер HP недоступен за пределами сетевого брандмауэра.
Откройте встроенный веб
-сервер HP (EWS) из меню Пуск.
Нажмите кнопку Пуск и щелкните пункт Программы
Щелкните на группе продуктов
HP, а затем выберите пункт панель инструментов HP.
Откройте встроенный веб
-сервер HP (EWS) из веб-браузера
IP-адрес или имя хоста, на главном экране панели управления
устройством коснитесь кнопки сети
-браузер и в адресной строке введите IP-адрес или имя хоста точно в том
, в котором они отображаются на панели управления устройством. Нажмите клавишу
HP Toolbox Windows 10 64 bit for HP CP1215
Is there an HP Toolbox (Windows 10 64 bit) for HP CP1215? I had it on my Windows 7 machine and it would alert me when mt ink was low.
Welcome to the HP Forums 🙂 I would like to take a moment and thank you for using this forum, it is a great place to find answers. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for First Time Here? Learn How to Post and More. I see from your post that you need information and assistance related to HP Toolbox is it available on Windows 10 or not. No worries, I would be glad to help you.
HP Tool box is an old application which was included in HP Solution center, Since HP solution is outdated there is no HP Toolbox available, however the same functions would be available in HP Printer assistant which you can find an icon on the desktop, Within HP Printer Assistant, you should have an item called «Maintain your printer» (Now this should be the second item on the left hand side) This is the tool box
Note: You need to have the full feature software installed to have the HP Printer Assistant.
I hope this answers your question, let me know if you need any further assistance. I’ll be more than happy to help you.
If the information I’ve provided was helpful,
give us some reinforcement by clicking the solution and kudos buttons,
that’ll help us and others see that we’ve got the answers!
Jeet_Singh
I am an HP Employee
I installed the printer by plugging in the USB cable. As such, Windows 10 installed the driver. I have looked at my control panel device manager printer properties, and have looke for a Printer Assistant utility and have foud nothing that enables me to see info about the printer
It looks like you were interacting with @Jeet_singh, but he is out for the day. I’m KrazyToad & I’m at your service.
The HP ToolBox or the Full Feature Software is not available for this Printer Model and for Windows 10
You can still check the printer Information and Ink Level using the HP Print And Scan Doctor
Click this Link: http://ftp.hp.com/pub/printers/hppsdr/HPPSdr.exe to download the HP Print And Scan Doctor
— On the menu bar, click Printer, and then click Supply Levels or Ink Levels.
— On the menu bar, click Printer, and then click Advanced Printer Data. The printer serial number, warranty status, and other information displays.
Alternately you can download and use the HP Smart App. Click this Link: https://www.microsoft.com/store/apps/9wzdncrfhwlh
On the app home screen, you can view the printer status, view estimated ink levels, order replacement ink supplies, and go to your HP Instant Ink dashboard if you are enrolled in HP Instant Ink.
View printer status : Confirm your printer is ready for use. A yellow caution triangle 
displays when the printer needs attention. Click the icon for more information about the issue.
Identify ink cartridges and order printer supplies : Click the ink cartridges listed next to your printer to view the estimated ink levels and identify which ink cartridges work with your printer.
Keep me posted if you need further assistance
Thank you and have a wonderful day 😊
If the information I’ve provided was helpful, give us some reinforcement by clicking the «Solution Accepted» on this Post and it will also help other community members with similar issue.
KrazyToad
I Am An HP Employee
I have HP Print And Scan Doctor 5.1 and when I launch the application the menu bar «Printer» tag is grayed and cannot be selected
FYI: Neither the Print and Scan Doctor nor HP Smart will connect to my CP 1215. Are there other options?
It’s great to have you back and your patience is greatly appreciated.
As I understand you have tried the steps suggested and unfortunately nothing has helped to resolve this issue. Don’t worry as I have a few other steps which should help you resolve this issue.
Let’s first uninstall the printer drivers from the root level and then reinstall them by following the below steps:
- Press “Windows key” + “r” to get the “Run” window.
- Type «services.msc» to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
- Now again open «Run» — Type “spool” and ok — Go to PRINTERS folder — delete everything in that folder.
- Go to services again — Start the print spooler.
- Now check for issue resolution.
- If the issue persists, also try clean installing the printer drivers. Here are the steps:
- First, unplug the USB cable from the printer if present.
- Go to Control panel – Programs and feature – Select all the HP LaserJet printer entries and uninstall them.
- Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
- Press the «windows key» + «r» to get the «Run» window open — Type «printui.exe /s» (There is a space between .exe & /) and press enter.
- Under print server properties, go to drivers — remove any entry there as well.
- Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
- Restart your computer.
- Please click here to download and install the basic drivers for your HP Printer.
- Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.
Now once you have installed the basic drivers, I would suggest here is to uninstall the HP Smart App and then try to install it from Windows store and check if that works.
Please let me know if this resolves the issue, or if you require further assistance!
Eagerly waiting for your response!
that said, If the information I’ve provided was helpful,
give us some reinforcement by clicking the solution and kudos buttons,
that’ll help us and others see that we’ve got the answers!
Jeet_Singh
I am an HP Employee