Hp proliant microserver gen8 windows 7 drivers

Драйверы и программное обеспечение

Service Pack for ProLiant

Загрузка файла означает ваше согласие с условиями и положениями Лицензионного соглашения на программное обеспечение Hewlett Packard Enterprise.
Примечание. Для использования некоторых программ необходимо наличие действующей гарантии, контракта на поддержку с Hewlett Packard Enterprise или оплаченная лицензия.

This release provides updates for Gen8 server platforms and adds support for vSphere 6.0 U3.

SPP release notes, Server Support Guide, OS Support Guide, as well as other release documents can be found here.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

There are two methods for using the Service Pack for ProLiant to update your ProLiant servers:

— Online mode — Runs on a Windows or Linux hosted operating system
— Offline mode — Server is booted to the ISO

Automatic mode — Firmware components will be updated without interaction

Interactive mode — Follow the onscreen steps to update firmware components

To initiate deployment in Interactive mode:

Run the launch_hpsum.bat (Windows) or launch_hpsum.sh (Linux) script, which is found in the root of the ISO.

Automatic mode will by default run firmware update without any user interaction after sitting 30 seconds at the menu screen when an SPP ISO image is used to boot the server.

Booting the SPP from iLO virtual media is only supported in Automatic Firmware Update mode. Users attempting this in any other mode may experience hangs from connection timeouts, difficulties updating iLO firmware, and mouse syncing issues.

Note: If you install a software from the SPP and then install a Microsoft Windows operating system Service Pack or other operating system updates, HP recommends reinstalling the software from the SPP.

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

In order to reduce the frequency at which servers need to be updated, HPE is changing the packaging and delivery of the SPP.

Going forward, two types of SPPs will be released:

A single “Production SPP” that contains the firmware and drivers for the all of the production server generations, and

Multiple server generation specific “Post-Production SPPs” that contain the firmware and drivers for a specific post-production server generation (e.g. Gen8 only Post-Production SPP that contains the firmware and drivers for all of Gen8 server models).

When a server generation transitions to “Post-Production,” the firmware and drivers for that server generation are frozen, packaged together on a “Post-Production SPP,” and released. The “Post-Production SPP” is supported through the EOS (end of support) for that server generation, and all future firmware and driver updates are released as hot fixes. This eliminates the need for yearly updates.

The 2017.04.0 SPP is the last production SPP to contain components for the G7 and Gen8 server platforms. For additional information, please refer to Reducing Server Updates.

For a specific list of firmware and software smart components included with this ISO, please see the Service Pack for ProLiant Release Notes or Service Pack for ProLiant Contents Report.

For firmware and driver support for specific hardware, go to the following URL: http://www.hpe.com/support.

For more information regarding Remote Management — Lights Out Technology please visit Remote Management.

The USB Key Utility can be used to copy your Service Pack for ProLiant ISO onto your portable USB key storage device. Please note that the utility is now 64-bit only. If the 32-bit application is needed, please use version 1.8.0.0. Earlier versions of the USB Key Utility will not work on an ISO image greater than 4GB.

Supported Devices and Features:

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Addressed VMware firmware installation issues with the following components:

• HPE Broadcom NX1 Online Firmware Upgrade Utility for VMware
• Online Firmware Upgrade Utility (ESXi 6.0) for HPE Mellanox VPI (Ethernet and Infiniband mode) devices on VMware ESXi
• Online Firmware Upgrade Utility (ESXi 6.0) for HPE Mellanox Ethernet only adapters
  No functional changes have been made to these firmware components; the updates are only needed for new installations.

Addressed VMware driver installation issues with the following component: HPE ProLiant Smart Array Controller Driver for VMware vSphere 6.0 (Driver Component) Version 2017.09.25 (B)

Included updated version of Fibre Channel (FC) and Fibre Channel over Ethernet (FCoE) driver to correct an occasional display of a purple diagnostic screen on VMware ESXi 5.5 and 6.0. This can happen when the driver receives a SCSI Check Condition response and perceives the SCSI Sense Data is either zero length or is invalid in the FCP_RSP field.

• Emulex Fibre Channel driver component for VMware vSphere 5.5 Version 2016.10.03
• Emulex Fibre Channel driver component for VMware vSphere 6.0 Version 2016.10.03

In order to reduce the frequency at which servers need to be updated, HPE is changing the packaging and delivery of the SPP.

Going forward, two types of SPPs will be released:

A single “Production SPP” that contains the firmware and drivers for the all of the production server generations, and

Multiple server generation specific “Post-Production SPPs” that contain the firmware and drivers for a specific post-production server generation (e.g. Gen8 only Post-Production SPP that contains the firmware and drivers for all of Gen8 server models).

When a server generation transitions to “Post-Production,” the firmware and drivers for that server generation are frozen, packaged together on a “Post-Production SPP,” and released. The “Post-Production SPP” is supported through the EOS (end of support) for that server generation, and all future firmware and driver updates are released as hot fixes. This eliminates the need for yearly updates.

The 2017.04.0 SPP is the last production SPP to contain components for the G7 and Gen8 server platforms. For additional information, please refer to Reducing Server Updates.

Описание

Улучшения

This release provides updates for Gen8 server platforms and adds support for vSphere 6.0 U3.

SPP release notes, Server Support Guide, OS Support Guide, as well as other release documents can be found here.

Инструкции по установке

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

There are two methods for using the Service Pack for ProLiant to update your ProLiant servers:

— Online mode — Runs on a Windows or Linux hosted operating system
— Offline mode — Server is booted to the ISO

Automatic mode — Firmware components will be updated without interaction

Interactive mode — Follow the onscreen steps to update firmware components

To initiate deployment in Interactive mode:

Run the launch_hpsum.bat (Windows) or launch_hpsum.sh (Linux) script, which is found in the root of the ISO.

Automatic mode will by default run firmware update without any user interaction after sitting 30 seconds at the menu screen when an SPP ISO image is used to boot the server.

Booting the SPP from iLO virtual media is only supported in Automatic Firmware Update mode. Users attempting this in any other mode may experience hangs from connection timeouts, difficulties updating iLO firmware, and mouse syncing issues.

Note: If you install a software from the SPP and then install a Microsoft Windows operating system Service Pack or other operating system updates, HP recommends reinstalling the software from the SPP.

Замечания о версии

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

In order to reduce the frequency at which servers need to be updated, HPE is changing the packaging and delivery of the SPP.

Going forward, two types of SPPs will be released:

A single “Production SPP” that contains the firmware and drivers for the all of the production server generations, and

Multiple server generation specific “Post-Production SPPs” that contain the firmware and drivers for a specific post-production server generation (e.g. Gen8 only Post-Production SPP that contains the firmware and drivers for all of Gen8 server models).

When a server generation transitions to “Post-Production,” the firmware and drivers for that server generation are frozen, packaged together on a “Post-Production SPP,” and released. The “Post-Production SPP” is supported through the EOS (end of support) for that server generation, and all future firmware and driver updates are released as hot fixes. This eliminates the need for yearly updates.

The 2017.04.0 SPP is the last production SPP to contain components for the G7 and Gen8 server platforms. For additional information, please refer to Reducing Server Updates.

For a specific list of firmware and software smart components included with this ISO, please see the Service Pack for ProLiant Release Notes or Service Pack for ProLiant Contents Report.

For firmware and driver support for specific hardware, go to the following URL: http://www.hpe.com/support.

For more information regarding Remote Management — Lights Out Technology please visit Remote Management.

The USB Key Utility can be used to copy your Service Pack for ProLiant ISO onto your portable USB key storage device. Please note that the utility is now 64-bit only. If the 32-bit application is needed, please use version 1.8.0.0. Earlier versions of the USB Key Utility will not work on an ISO image greater than 4GB.

Supported Devices and Features:

Исправления

Upgrade Requirement:
Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Addressed VMware firmware installation issues with the following components:

• HPE Broadcom NX1 Online Firmware Upgrade Utility for VMware
• Online Firmware Upgrade Utility (ESXi 6.0) for HPE Mellanox VPI (Ethernet and Infiniband mode) devices on VMware ESXi
• Online Firmware Upgrade Utility (ESXi 6.0) for HPE Mellanox Ethernet only adapters
  No functional changes have been made to these firmware components; the updates are only needed for new installations.

Addressed VMware driver installation issues with the following component: HPE ProLiant Smart Array Controller Driver for VMware vSphere 6.0 (Driver Component) Version 2017.09.25 (B)

Included updated version of Fibre Channel (FC) and Fibre Channel over Ethernet (FCoE) driver to correct an occasional display of a purple diagnostic screen on VMware ESXi 5.5 and 6.0. This can happen when the driver receives a SCSI Check Condition response and perceives the SCSI Sense Data is either zero length or is invalid in the FCP_RSP field.

• Emulex Fibre Channel driver component for VMware vSphere 5.5 Version 2016.10.03
• Emulex Fibre Channel driver component for VMware vSphere 6.0 Version 2016.10.03

Важно

In order to reduce the frequency at which servers need to be updated, HPE is changing the packaging and delivery of the SPP.

Going forward, two types of SPPs will be released:

A single “Production SPP” that contains the firmware and drivers for the all of the production server generations, and

Multiple server generation specific “Post-Production SPPs” that contain the firmware and drivers for a specific post-production server generation (e.g. Gen8 only Post-Production SPP that contains the firmware and drivers for all of Gen8 server models).

When a server generation transitions to “Post-Production,” the firmware and drivers for that server generation are frozen, packaged together on a “Post-Production SPP,” and released. The “Post-Production SPP” is supported through the EOS (end of support) for that server generation, and all future firmware and driver updates are released as hot fixes. This eliminates the need for yearly updates.

The 2017.04.0 SPP is the last production SPP to contain components for the G7 and Gen8 server platforms. For additional information, please refer to Reducing Server Updates.

История изменений

Заявление об отказе от ответственности Продукты, проданные до 1 ноября 2015 года, т.е., до момента раздела компании Hewlett-Packard на компании Hewlett Packard Enterprise и HP Inc., могут иметь старые наименования и номера моделей, отличающиеся от текущих моделей.

Источник