Зарегистрирован: 03.03.2004
Пользователь #: 14,947
Сообщения: 2280
Откуда: Moscow

Голоса: 5

Зарегистрирован: 29.05.2014
Пользователь #: 151,923
Сообщения: 2

Зарегистрирован: 03.03.2004
Пользователь #: 14,947
Сообщения: 2280
Откуда: Moscow

Голоса: 5

Зарегистрирован: 02.07.2004
Пользователь #: 18,619
Сообщения: 3

Зарегистрирован: 01.12.2014
Пользователь #: 154,635
Сообщения: 4

Зарегистрирован: 09.04.2015
Пользователь #: 156,448
Сообщения: 2

Зарегистрирован: 09.04.2015
Пользователь #: 156,448
Сообщения: 2

Зарегистрирован: 20.10.2009
Пользователь #: 82,419
Сообщения: 23

Зарегистрирован: 20.10.2009
Пользователь #: 82,419
Сообщения: 23

Источник

HP StorageWorks P2000 – Connecting to and Configuring

KB ID 0000569В

Problem

Normally I simply connect a new MSA to a clients network, and it gets it’s address from DHCP. Then I can get the address for the DHCP Scope, and point my web browser at it.

Yesterday I was starting with new virtual infrastructure and had no DHCP. With the G1 and G2 models, you got a console/serial cable and could just terminal in. With the G3 they have replaced the serial socket with a mini USB socket. Each time I put in a new P2000, I think “I wonder how that USB CLI socket works?” Yesterday I had to find out.

Solution

The Quickest Solution – is to connect the MSA to the network, and if it cannot get a DHCP address it automatically gives itself 10.0.0.2/24 on controller A and 10.0.0.3/24 on controller B.

MSA Default username = manage
MSA Default password = !manage

The Next Quickest Solution

1. If you do have DHCP running, connect your MSA and run the MSA Device Discovery Tool, (On the CD that came with the device).

2. Once you know the IP address, you can connect with your web browser.

Connect to and Manage your MSA via the USB/CLI Cable

1. For your machine to see the MSA as a device, you need to install a driver, there is a copy of the drivers on the CD that came with the device.

Note: Windows 7 users, use the Windows 2008 Drivers or use this one.

2. Install the driver.

3. Connect the USB lead from the MSA controller to your machine, TAKE NOTE of the COM port number it’s using.

4. Now you can use whatever terminal emulation program you prefer to connect to that COM port. (I prefer HyperTerminal, or you can use Putty if you want something a bit lighter).

5. Set the following, Bits per second = 115200, Data bits = 8, Parity = None, Stop bits = 1, and Flow control = None.

6. You will need to press to connect, then login.

MSA Default username = manage
MSA Default password = !manage

7. I only need to set the IP address of the controller(s) like so;

8. Then (If you have dual controllers) you can set the IP address of controller B.

9. Give the new IP addresses a quick test.

10. Note: You Cannot Manage an G3 P2000 with Internet Explorer 9, If you try it will simply say “Unable to Authenticate, Try again”

11. Normally I use Chrome, but that won’t work either рџ™Ѓ Firefox works fine though!

Источник

Драйверы и программное обеспечение

HP StorageWorks P2000/MSA2000 Device Discovery Tool for Windows

Загрузка файла означает ваше согласие с условиями и положениями Лицензионного соглашения на программное обеспечение Hewlett Packard Enterprise.
Примечание. Для использования некоторых программ необходимо наличие действующей гарантии, контракта на поддержку с Hewlett Packard Enterprise или оплаченная лицензия.

Upgrade Requirement:
Recommended — HP recommends users update to this version at their earliest convenience.

• Initial release of Device Discovery tool as a standalone, self-executing package — prior to this release, the Device Discovery tool was only available on the MSA2000 Software Support CD product for direct invocation from the CD framework.
• Added support for HP StorageWorks P2000 G3 arrays

To ensure the integrity of your download, HP recommends verifying your results with the following MD5 Checksum values:

This is a self extracting executable module.

Place the downloaded firmware package in a temporary directory.

Using Windows Explorer, navigate to the directory containing the download.

Double click the executable file.

Follow onscreen instructions.

Upgrade Requirement:
Recommended — HP recommends users update to this version at their earliest convenience.

Описание

Улучшения

Upgrade Requirement:
Recommended — HP recommends users update to this version at their earliest convenience.

• Initial release of Device Discovery tool as a standalone, self-executing package — prior to this release, the Device Discovery tool was only available on the MSA2000 Software Support CD product for direct invocation from the CD framework.
• Added support for HP StorageWorks P2000 G3 arrays

Инструкции по установке

To ensure the integrity of your download, HP recommends verifying your results with the following MD5 Checksum values:

This is a self extracting executable module.

Place the downloaded firmware package in a temporary directory.

Using Windows Explorer, navigate to the directory containing the download.

Double click the executable file.

Follow onscreen instructions.

Замечания о версии

Upgrade Requirement:
Recommended — HP recommends users update to this version at their earliest convenience.

История изменений

Заявление об отказе от ответственности Продукты, проданные до 1 ноября 2015 года, т.е., до момента раздела компании Hewlett-Packard на компании Hewlett Packard Enterprise и HP Inc., могут иметь старые наименования и номера моделей, отличающиеся от текущих моделей.

Источник