find a pattern in files and rename them [closed]
Want to improve this question? Update the question so it’s on-topic for Stack Overflow.
Closed 3 years ago .
I use this command to find files with a given pattern and then rename them to something else
As I run this command, I see some outputs like this
However at the end, when I run ls , I see the old file names.
4 Answers 4
You are echo’ing your ‘mv’ command, not actually executing it. Change to:
I would suggest using the rename command to perform this task. rename renames the filenames supplied according to the rule specified as a Perl regular expression.
In this case, you could use:
In reply to anumi’s comment, you could in effect search recursively down directories by matching ‘**’:
This works for my needs, replacing all matching files or file types. Be warned, this is a very greedy search
I will usually run with find . -type f -name «MYSTRING*» in advance to check the matches out before replacing.
or ditch the filetype to make it even greedier
Not the answer you’re looking for? Browse other questions tagged linux bash or ask your own question.
Linked
Related
Hot Network Questions
site design / logo © 2020 Stack Exchange Inc; user contributions licensed under cc by-sa. rev 2020.9.18.37632
Rename multiple files by replacing a particular pattern in the filenames using a shell script [duplicate]
Write a simple script that will automatically rename a number of files. As an example we want the file *001.jpg renamed to user defined string + 001.jpg (ex: MyVacation20110725_001.jpg) The usage for this script is to get the digital camera photos to have file names that make some sense.
I need to write a shell script for this. Can someone suggest how to begin?
8 Answers 8
An example to help you get off the ground.
In this example, I am assuming that all your image files begin with «IMG» and you want to replace «IMG» with «VACATION».
The shell automatically evaluates *.jpg to all the matching files.
The second argument of mv (the new name of the file) is the output of the sed command that is replacing «IMG» with «VACATION».
If your filenames include multiple consecutive spaces pay extra careful attention to the «$f» notation. You need the double-quotes to preserve such spaces.
You can use rename utility to rename multiple files by a pattern. For example following command will prepend string MyVacation2011_ to all the files with jpg extension.
<> \; This will call rename once per file. – Erik Forsberg Nov 22 ’16 at 12:26
Again assuming that all your image files have the string «IMG» and you want to replace «IMG» with «myVacation».
With bash you can directly convert the string with parameter expansion.
Example: if the file is IMG_327.jpg, the mv command will be executed as if you do mv IMG_327.jpg myVacation_327.jpg . And this will be done for each file found in the directory matching *.jpg .
IMG_001.jpg -> myVacation_001.jpg
IMG_002.jpg -> myVacation_002.jpg
IMG_1023.jpg -> myVacation_1023.jpg
etcetera.
this example, I am assuming that all your image files begin with «IMG» and you want to replace «IMG» with «VACATION»
solution : first identified all jpg files and then replace keyword
remove echo after you have it right.
Parameter substitution with # will keep only the last part, so you can change its name.
You can see «parameter expansion» in man bash to understand the above better.
Can’t comment on Susam Pal’s answer but if you’re dealing with spaces, I’d surround with quotes:
eg will rename all files in the cwd with names ending in «factory.py» to be replaced with names ending in «service.py»
1) in the sed cmd, the -n flag will suppress normal behavior of echoing input to output after the s/// command is applied, and the p option on s/// will force writing to output if a substitution is made. since a sub will only be made on match, sed will only have output for files ending in «factory.py»
2) in the s/// replacement string, we use «& » to interpolate the entire matching string, followed by a space character, into the replacement. because of this, it’s vital that our RE matches the entire filename. after the space char, we use «\1service.py» to interpolate the string we gulped before «factory.py», followed by «service.py», replacing it. So for more complex transformations youll have to change the args to s/// (with an re still matching the entire filename)
3) we use xargs with -n 2 to consume the output of sed 2 delimited strings at a time, passing these to mv (i also put the -p option in there so you can feel safe when running this). voila.
6 Methods To Rename Multiple Files At Once In Linux
As you may already know, we use mv command to rename or move files and directories in Unix-like operating systems. But, the mv command won’t support renaming multiple files at once. It can rename only one file at a time. Worry not. There are few other utilities available, especially for batch renaming files. In this tutorial, we are going to learn to rename multiple files at once in six different methods. All examples provided here are tested in Ubuntu 18.04 LTS, however they should work on any Linux operating systems. Let us get started!
Rename Multiple Files At Once In Linux
There could be many commands and utilities to a rename bunch of files. As of writing this, I know the following methods only. I will keep updating the list if I come across any method in future.
Method 1 — Using mmv
The mmv utility is used to move, copy, append and rename files in bulk using standard wildcards in Unix-like operating systems. It is available in the default repositories of Debian-based systems. To install it on Debian, Ubuntu, Linux Mint, run the following command:
Let us say, you have the following files in your current directory.
Now you want to rename all files that starts with letter «a» to «b». Of course, you can do this manually in few seconds. But just think if you have hundreds of files and want to rename them? It is quite time consuming process. Here is where mmv command comes in help.
To rename all files starting with letter «a» to «b», simply run:
Let us check if the files have been renamed or not.
As you can see, all files starts with letter «a» (i.e a1.txt, a2.txt, a3.txt) are renamed to b1.txt, b2.txt, b3.txt.
Explanation
In the above example, the first parameter (a\*) is the ‘from’ pattern and the second parameter is ‘to’ pattern ( b\#1 ). As per the above example, mmv will look for any filenames staring with letter ‘a’ and rename the matched files according to second parameter i.e ‘to’ pattern. We use wildcards, such as ‘*’, ‘?’ and ‘[]‘, to match one or more arbitrary characters. Please be mindful that you must escape the wildcard characters, otherwise they will be expanded by the shell and mmv won’t understand them.
The ‘#1′ in the ‘to’ pattern is a wildcard index. It matches the first wildcard found in the ‘from’ pattern. A ‘#2′ in the ‘to’ pattern would match the second wildcard and so on. In our example, we have only one wildcard (the asterisk), so we write a #1. And, the hash sign should be escaped as well. Also, you can enclose the patterns with quotes too.
You can even rename all files with a certain extension to a different extension. For example, to rename all .txt files to .doc file format in the current directory, simply run:
Here is an another example. Let us say you have the following files.
You want to replace the the first occurrence of abc with xyz in all files in the current directory. How would you do?
Please note that in the above example, I have enclosed the patterns in single quotes.
Let us check if «abc» is actually replaced with «xyz» or not.
See? The files abcd1.txt, abcd2.txt, and abcd3.txt have been renamed to xyzd1.txt, xyzd2.txt, and xyzd3.txt.
Another notable feature of mmv command is you can just print output instead of renaming the files using -n option like below.
This way you can simply verify what mmv command would actually do before renaming the files.
For more details, refer man pages.
Method 2 — Using rename utility
The rename utility will rename given files by substituting the first occurrence of expression in their name by replacement.
The rename command comes preinstalled in most Unix-like operating systems. If it is not available by default, run the following command to install it on Debian-based systems:
For instance, I have the following files in the current directory.
Let us replace the the first occurrence of abc with xyz wherever found. To do so, run:
Now, verify if the changes have been made with ls command.
Sometimes, you might to just print output instead of renaming the files. If so, use -n flag to display which renames would occur without performing them:
As you can see, the above command didn’t make any changes, instead just displays which renames would occur.
You can force renaming task even if the operation would overwrite existing files using -f flag like below.
If you don’t want to overwrite the files, you can simply convert them to upper or lowercase letters (and vice versa) to prevent «already exists» errors. To convert all filenames to lower case, so:
Let us check if the changes have been made.
Yes, the letters in the filenames have been changed from lower case to upper case.
Similarly, to convert filenames to lower case, run:
We can remove all blank lines in a filename as well. For example, I have the following file.
To remove all blank spaces in the above filename, run:
Now, the filename doesn’t have any blank spaces.
Replace blank spaces with underscores:
You might want to change the file extension, but not rename the filenames. It is also possible. The following command would rename all *.txt files to *.doc.
Verify the changes using ls command:
To remove extension in all files matching .txt, run:
For more details, refer man pages.
Method 3 — Using renameutils
The renameutils is a set of programs that is designed to batch renaming files and directories faster and easier. Renameutils consists of the following five programs:
- qmv (quick move),
- qcp (quick copy),
- imv (interactive move),
- icp (interactive copy),
- deurlname (delete URL).
Installing renameutils
Renameutils is available in the default repositories of most Linux distributions. To install it on Arch-based systems, enable the community repository and run:
On Debian-based systems:
Now, let us see some examples.
1. qmv
The qmv program will open the filenames in a directory in your default text editor and allows you to edit them.
I have the following three files in a directory named ‘ostechnix’.
To rename the filenames in the ‘ostechnix’ directory, simply do:
Now, change the filenames as you wish. You will see the live preview as you edit the filenames.
Alternatively, you can cd into the directory and simply run ‘qmv’.
Once you opened the files, you will see the two columns as shown in the following screenshot.
Bulk rename files using qmv
The left column side displays the source filenames and the right column displays the destination names (the output filenames that you will get after editing).
Now, rename all the output names on the right side as you wish.
Bulk rename files using qmv
After renaming filenames, save and quit the file.
Finally, you will see the following output:
Now, check if the changes have actually been made using ‘ls’ command:
See? All files are renamed. Not just files, the renameutils will also rename the directory names as well.
Here is a quick video demo of qmv program:
Bulk rename files using qmv
If you don’t want to edit the filenames in dual-column format, use the following command to display the destination file column only.
Where, ‘-f’ refers the format and ‘do’ refers destination-only.
Now, you will see only the destination column. That’s the column we make the changes.
Once done, save and close the file.
For more details, refer man pages.
2. qcp
The qcp program works like qmv, but copies files instead of renaming them. In this case, you will get two instances of same file. That means it will keep both original and duplicate files.
Rename the filenames listed on the right side. Save and quit the file. Finally, verify the changes made using ls command:
For more details, refer man pages.
3. imv
The imv program allows us to interactively rename the filenames. Obviously, it is not for bulk renaming. You could only rename the files one by one.
Edit the filename as you like and hit ENTER to rename it.
For more details, refer man pages.
4. icp
The icp program is same as imv, but it copies the files instead of moving them.
For more use cases and commands, please refer man pages.
I don’t know why the developers added these two utilities while we can do the same using mv and cp command.
5. deurlname
The deurlname program removes URL encoded characters (such as %20 representing space) from file names. Some programs, for examples w3m, tend to keep those characters encoded in saved files. You can this tool for cleaning up the filenames you downloaded from the Internet.
Take a look the the following file.
There are some special characters and numbers in the filename. If you clean it up, just run:
Now, look how the file name is changed.
The filename is clean and readable.
Refer man pages for more details.
For more details, refer the project’s website given at the end of this guide.
Method 4 — Using vimv
As the name says, Vimv is a command line utility to bulk rename files using Vim editor. You can, of course, change the editor by changing the value of $EDITOR environment variable.
To install Vimv, git clone the repository:
Copy the vimv binary to your $PATH, for example /usr/local/bin/.
Finally, make it executable:
Now go to the directory and run the following command to edit the filenames. You will see the filenames in Vi editor. Press i to switch to interactive mode and edit the filenames as the way you edit text in Vi editor. Once done, press ESC key and type :wq to save and exit.
The files inside the directory should be renamed now. Here is a short video demo.
Bulk rename files using Vimv
For more details, refer the project’s GitHub repository given at the end of this guide.
Method 5 — Using Emacs
If you have a system with Emacs editor installed, you can do batch renaming easily by following these steps.
1. Open your Emacs editor.
2. Press Alt+x and type the following and hit ENTER to switch to wdired-mode (short for «writable directory editor mode»).
3. Enter the path to the directory (E.g /home/sk/ostechnix) which contains the files to rename and hit ENTER key.
4. Then, press Ctrl+x and Ctrl+q to switch to read-write mode.
5. Now, rename the files. Once done, press Ctrl+c and Ctrl+c (two times) to save the changes. To abort the changes, press Ctrl+c and Ctrl+k.
Watch the demo video:
Bulk rename files using Emacs
See? It is very simple to rename multiple files at once.
Method 6 — Using Thunar file manager
The Thunar file manager has built-in bulk rename option by default.
Thunar is available in the default repositories of most Linux distributions.
To install it on Arch-based systems, run:
On Debian, Ubuntu, Linux Mint:
Once installed, you can launch bulk rename utility from menu or from the application launcher. To launch it from Terminal, use the following command:
This is how bulk rename looks like.
Click the plus sign and choose the list of files you want to rename. Bulk rename can rename the name of the files, the suffix of the files or both the name and the suffix of the files. Thunar currently supports the following Bulk Renamers:
- Insert Date or Time
When you select one of these criteria from the picklist, you will see a preview of your changes in the New Name column, as shown in the below screenshot.
Once you choose the criteria, click on Rename Files option to rename the files.
You can also open bulk renamer from within Thunar by selecting two or more files. After choosing the files, press F2 or right click and choose Rename.
Suggested read:
And, that’s all for now. Hope this was useful. Do you know any other method to add in this list? Please do comment in the comment section below. I will check and update this guide accordingly.