Драйвер для Nikon Coolscan в Windows 10, 8 и 7. Настройка сканера
Хотя плёночные сканеры Nikon Coolscan давно уже не выпускаются, тем не менее любители плёночной фотографии используют их до их пор. Появляются новые версии Windows, но драйверы для этих сканеров уже не обновляются, последние официально были выпушены для Windows Vista. Можно специально для такого сканера держать старую операционную систему на компьютере или старый компьютер, но мне захотелось для комфортной работы найти возможность работы сканера а 64-битной Windows 10 и более старых Windows 7 и 8. Поискав информацию в интернете, я нашёл в итоге решение.
Я настраивал Nikon SUPER COOLSCAN 8000 ED, но другие сканеры серии Coolscan по отзывам тоже работают с этим драйвером, в нём разные модели указаны.
Сначала надо установить старые драйвера с помощью программы сканирования Nikon Scan. Для Windows XP выпущена версия 4 и обновление 4.02, а для Windows Vista – 4.03. Можно сразу ставить драйверы Vista в режиме совместимости. Щёлкаем правой кнопкой по иконке программы, выбираем вкладку Совместимость, далее ставим галочку где Запустить программу в режиме совместимости с: и выбираем там Windows Vista.
После этого надо найти два файла NKScnUSD.dll и Nks1394.inf в директории C:\Program Files (x86)\Common Files\Nikon\Driver\Scan1394. Откройте в блокноте Nks1394.inf, удалите всё его содержимое и скопируйте туда этот текст
;========================= Begin of scanners.inf ===============================
; scanners.inf — Windows Still Image Setup File
[Version]
Signature=”$CHICAGO$”
Class=Image
ClassGUID=<6bdd1fc6-810f-11d0-bec7-08002be2092f>
Provider=%Provider%
DriverVer=1/1/2009,1.0
[Manufacturer]
%Mfg%=Models,ntamd64
[Models]
; USB scanners
“Nikon LS-40” = USBScanner,USB\Vid_04b0&Pid_4000
“Nikon LS-50” = USBScanner,USB\Vid_04b0&Pid_4001
“Nikon LS-5000” = USBScanner,USB\Vid_04b0&Pid_4002
; Firewire scanners
“Firewire Scanner” = SBP2Scanner,SBP2\GenScanner
“Nikon SUPER COOLSCAN 4000 ED” = SBP2Scanner_NIKON,SBP2\NIKON___&LS-4000_ED______&CMDSETID104D8
“Nikon SUPER COOLSCAN 8000 ED” = SBP2Scanner_NIKON,SBP2\NIKON___&LS-8000_ED______&CMDSETID104D8
“Nikon SUPER COOLSCAN 9000 ED” = SBP2Scanner_NIKON,SBP2\NIKON___&LS-9000_ED______&CMDSETID104D8
;—————- Duplicated from [Models]
[Models.ntamd64]
; USB scanners
“Nikon LS-40” = USBScanner,USB\Vid_04b0&Pid_4000
“Nikon LS-50” = USBScanner,USB\Vid_04b0&Pid_4001
“Nikon LS-5000” = USBScanner,USB\Vid_04b0&Pid_4002
; Firewire scanners
“Firewire Scanner” = SBP2Scanner,SBP2\GenScanner
“Nikon SUPER COOLSCAN 4000 ED” = SBP2Scanner_NIKON,SBP2\NIKON___&LS-4000_ED______&CMDSETID104D8
“Nikon SUPER COOLSCAN 8000 ED” = SBP2Scanner_NIKON,SBP2\NIKON___&LS-8000_ED______&CMDSETID104D8
“Nikon SUPER COOLSCAN 9000 ED” = SBP2Scanner_NIKON,SBP2\NIKON___&LS-9000_ED______&CMDSETID104D8
;—————- USBScanner ————————-
[USBScanner]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=1
Capabilities=0
[USBScanner.Services]
Include=sti.inf
Needs=STI.USBSection.Services
;—————- SBP2Scanner ————————
[SBP2Scanner]
Include=sti.inf
Needs=STI.SBP2Section
SubClass=StillImage
DeviceType=1
DeviceSubType=2
Capabilities=0
[SBP2Scanner_NIKON]
Include=sti.inf
Needs=STI.SBP2Section
SubClass=StillImage
DeviceType=1
DeviceSubType=2
Capabilities=0
AddReg=NK1394SCN.AddReg
CopyFiles=NK1394SCN.CopyUSDFiles
[SBP2Scanner.Services]
Include=sti.inf
Needs=STI.SBP2Section.Services
[SBP2Scanner_NIKON.Services]
Include=sti.inf
Needs=STI.SBP2Section.Services
[NK1394SCN.AddReg]
HKR,,HardwareConfig,1,2
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,”scsiscan.sys”
HKR,DeviceData,ICMProfile,1,0,0
HKR,,USDClass,,”<07C71AC0-FA90-11d3-B409-00C04F87578E>”
HKCR,CLSID\<07C71AC0-FA90-11d3-B409-00C04F87578E>. ”Nikon STI USD”
HKCR,CLSID\<07C71AC0-FA90-11d3-B409-00C04F87578E>\InProcServer32. %11%\NKSCNUSD.DLL
HKCR,CLSID\<07C71AC0-FA90-11d3-B409-00C04F87578E>\InProcServer32,ThreadingModel,,”Both”
[SourceDisksNames]
1=%DiskName%,,
[SourceDisksFiles]
NKSCNUSD.dll=1
[DestinationDirs]
NK1394SCN.CopyUSDFiles=11
[NK1394SCN.CopyUSDFiles]
NKSCNUSD.dll. 32
;—————————————————–
[Strings]
Provider=”steelchn@gmail.com”
Mfg=”DIY Software”
DiskName=”Nikon Scan 4 CD-ROM”
;========================= End of scanners.inf ===============================
Сохраните файл и закройте его.
Установочные файлы Nikon Scan 4, можно скачать в архиве отсюда. Там же лежит старый драйвер для мак и уже готовый драйвер для поздних версий Windows, сделанный, как указано выше.
Если сканер не подключён ещё к компьютеру, подключите его и включите. Откройте диспетчер устройств в Панели управления. В списке устройств сканер должен отображаться со значками вопроса. По крайней мере у меня было так.
Нажатием правой кнопки мыши выберите Обновить драйвер устройства. Далее выберите Выбрать вручную на моем компьютере и в качестве источника укажите ту самую папку, в которой лежит отредакированный файл драйвера, по адресу C:\Program Files (x86)\Common Files\Nikon\Driver\Scan1394. Если вы его в другую папку сохранили – указывайте эту папку, адрес нахождения драйвера в данном случае не принципиален.
Проигнорируйте предупреждение системы и продолжите установку. После этого ваш сканнер должен отображаться с корректным именем. Запускайте Nikon Scan 4 или Vuescan и можете сканировать.
Так я всё сделал в Windows 7. В Windows 10 процедура установки несколько усложнилась. Система не давала обновить драйвер, ругаясь: “INF стороннего производителя, не содержит информации о подписи”. Пришлось сделать ряд дополнительных манипуляций.
Зажав клавишу SHIFT перезагружаем компьютер. Клавишу не отпускать, пока не появится синее окно. После этого выбираем пункт Диагностика. На следующем экране Доволнительные параметры. Потом Параметры загрузки и Перезагрузить. После перезагрузки опять появится синий экран с 9 пунктами. Надо выбрать 7-ой пункт, нажав F7.
После загрузки компьютера нужно проделать описанную выше операцию с открытием диспетчера устройств и обновлением драйвера. При обновлении выскочит предупреждающее окошко Windows о сомнительном драйвере, надо будет выбрать – Всё равно установить или как-то так называется пункт. И после этого сканер заработает в Windows 10. В Windows 8 я устанавливать драйвер для этого сканера не пробовал, но там должно всё быть по аналогии с семёркой и десяткой.
Nikon CoolScan V ED Driver
Want to keep using your Nikon CoolScan V ED on Windows 10 ?
VueScan is here to help!
We reverse engineered the Nikon CoolScan V ED driver and included it in VueScan so you can keep using your old scanner.
What is VueScan?
VueScan is an application for scanning documents, photos, film, and slides on Windows, macOS, and Linux. VueScan supports over 6000 scanners from 42 manufacturers — even when there isn’t a driver available from the manufacturer.
Whether you’re having trouble getting your scanner connected to your computer, or you want to use the scanner software with the most features, VueScan is the tool for you.
How it works
We reverse engineer older scanner drivers so that you can use old scanners that are no longer supported
We also use the latest drivers and plugins from manufacturers and operating systems
You download VueScan and use it to scan documents, photos, film and slides with your scanner
Works on 6000+ scanners
Works on Windows, macOS, and Linux
Updated every week or two
Advanced Scanning Control
Works on Flatbed, Document, and Film/Slide Scanner
Translated in to 28+ languages
The Tool For All Your Scanning Needs
VueScan has the features you need no matter what you need to scan
Scan Film and Slides
VueScan is the ultimate tool for all your film and slide scanning needs.
Works with almost all film/slide scanners
Scan to JPEG/TIFF/RAW
Infrared Dust Removal
Nikon CoolScan V ED
Nikon CoolScan V ED Technical Information
VueScan is compatible with the Nikon CoolScan V ED on Windows x86, Windows x64, Windows RT, Windows 10 ARM, Mac OS X and Linux.
This scanner has an infrared lamp for scanning film. VueScan’s ‘Filter | Infrared clean’ option can be used to remove dust spots from film scans. This is similar to (and we think better than) the ICE and FARE algorithms.
It scans with both visible light and infrared light in a single pass.
Infrared cleaning works well with all types of color negative and color slide film, including Kodachrome. However, silver-based black/white film doesn’t work with infrared cleaning because the silver particles look the same in visible light and infrared light.
All types of Nikon film adapters are supported.
If you’re using Windows and you’ve installed a Nikon driver, VueScan’s built-in drivers won’t conflict with this. If you haven’t installed a Windows driver for this scanner, VueScan will automatically install a driver.
You can use this scanner on Mac OS X and Linux without installing any other software.
Nikon sold this scanner in some countries as the LS-50.
Nikon Coolscan 5000ED — Scan not matching Preview
So I have a long running thread over at sevenforums.com on Getting your Nikon Coolscan to work on W7 x64. Along the way many have asked about running under Windows 8/10 and any issue encountered.
Well as of today I can answer yes — the scanner works under Windows 10 Pro x64! And no — there are no issues.
First, if you’re running a scanner that needs a FireWire (IEEE 1394) card as the Coolscan LS4000ED does, Windows 10 Pro (x64) will happily accept ShineStars’s FireWire Adapter card (18.99). I just bought it and it works like a champ. It includes the VIA chip which is what you want for compatibility with older 1394 FireWire devices, and there are no required driver installs — Just plug and play. It also uses the smaller PCIE X1 port.
ShineStare IEEE 1394 FireWire Card ($18.99)
Now for the tech savvy person wanting to run their Nikon Coolscan scanners under Windows 10, just follow the procedures in my tutorial, but prior to performing step 7, you’ll need to disable Windows 10’s Driver Signature Enforcement policy. See this article — How to: Disable driver signature enforcement on Windows 10 (use option 1)
Basically, Driver Signature Enforcement is a security feature that insures drivers being installed are legitimate, have not been altered, and be digitally signed.
Since Nikon stopped supporting their Coolscan scanners under Windows 7, and beyond, a modified driver was created back in 2009. Since then, it has been the defacto driver when running under 7 and beyond. However, under Windows 8/10 you’ll need to at least temporarily disable DSE for it to install. After that, complete step 9 and you’re done.
Here are some screenshots and scanned photos.
First this shows both FireWire card and Scanner installed and working in device manager.
Device Manager showing both FireWire card and Nikon scanner installed.
Three images scanned. These are straight scans with no post cleanup other than ICE used on the color scans.
First one is color negative.
Color negative scanned with Nikon LS 4000ED
Second one is B&W negative.
B&W negative scanned with Nikon LS 4000ED
Last is Color Slide.
Color slide scanned with Nikon LS 4000ED
And yes, you can set the Nikon scan software to crop out borders. These are test scans to simply show the scanner and Nikon Scan software works without issue.
So yes, these scanners work under Windows 10. Tutorial updated.
And BTW I’ve not encountered the issues the OP was having!
Look kid, there’s the beginning and the end; all that stuff in the middle is positioning for where you finish.