Меню Рубрики

Sil3132 windows 10 driver

Sil3132 windows 10 driver

Вопрос

I recently upgraded my PC with new 6th gen Intel i7 with a newer motherboard (Gigabyte Z170-HD3P), which unfortunately, like most newer motherboards, has only 6 SATA internal connectors and none e-Sata connectors, so I had to buy an external add-on SATA controller in order to plug in my external HDDs.

I bought the Silicon Image Sil 3132 controller and was happy to see that it was immediately seen by the motherboard and BIOS.
Unfortunately, while Windows 10 recognized the controller, found the driver for it and reported that the device works correctly, when I plug my external HDDs, Windows 10 starts to choke and become unusable. When I unplug the HDDs, the performance comes back to normal.

After a lot of failed attempts (Flashing the BIOS to different versions [Base, Sataraid 5] accordingly changing the drivers, using older drivers), unfortunately nothing worked. I also need to report that I have my motherboard’s most recent BIOS version (F5) and all newest drivers for the rest of the hardware (which is mostly brand new), including Intel’s chipset and Rapid Storage.

This behavior reminded me of a driver issue I had with my old motherboard and its Marvell SATA controller when I had first upgraded to Windows 8 from Windows 7, and I had managed to solve it by using newest drivers.
Unfortunately, there are no newer drivers for Sil 3132 from Silicon Image.

I asked a question at Microsoft Community here : http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/pci-express-sata-controller-sil-3132-doesnt-work/bfa64e6f-fdba-4e0f-a5ce-e4097b7a7ac0

and they redirected me here.

I’ve uploaded a WPT log file, following the steps described here: http://answers.microsoft.com/en-us/windows/wiki/windows_10-update/windows-performance-recorder/a1648e8c-50c7-4243-9f1d-4216385c7ff3

The link for the file is here: https://onedrive.live.com/redir?resid=1A726A78DBFE2DC1!143&authkey=!AFoDlN-8IlBhV-Q&ithint=file%2c7z

Is there any hope for me, or should I just quit trying to make this controller work?

I am willing to provide you with any additional information you’d like to help you pinpoint the problem.

Источник

Sil3132 windows 10 driver

Advanced Member Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Цитата:

[q]Не шьёт, похоже что мой тип ППЗУ не поддерживается:

И что, ни как его не перепрошить? У меня Sil3132 такое же сообщение выдает.

———-
Терпение и труд — Все перетрут!
Всего записей: 851 | Зарегистр. 25-02-2002 | Отправлено: 09:55 23-01-2020
ndch

Gold Member

Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Для страдальцев с sii3114 (pci sata):
1. Подцепляем к контроллеру винт (лучше голый и небольшой)

2. из-под досу:
UPDFLASH.EXE r5500.bin
если матерится «не знайууу флеху» — подбираем перебором (на St-Lab A-224 (IP-S09-B424-00-00012 в девичестве)с флехой eon en29lv040a подошла «14»)

Скорости по нынешним меркам — аховые. Ну а чего хотеть от pci ?
Самое шустрое в линейном чтении (5073/5403/5500 ; raid/base) — r5500.bin, скоростища порядка 91 Мб/сек (был подцеплен ssd)
Самое печальное — base (например 5.0.73) — убогая пила,

PS. при «base» прошивке прошивается из гуёвины «диспетчера устройств» (win 10 x64 2004)
PS. Оживлял старый комп Откапывал стюардессу.

PPS. XP не хотела загружаться, выглядело как будто процесс загрузки вообще не начался — моргающий курсор и всё. Вылечилось заменой xp-шного NTLDR на NTLDR от windows server 2003 r2 (x86, rus, 298 192 Байт). После тупо замены файла загрузка пошла. При возврате «оригинального» xp-шного NTLDR — снова моргающий курсор и далее ничего интересного.

r5500 с единичным sata ssd. 93 MB/sec на Pentium 3 (EB/Coppermine) 866.
Купленый на али за пару долларов «адаптер» IDE/SATA на чипе DOF B75TT0041 — udma 4 со скоростью порядка 61 MB/sec (но без заморочек с драйверами и т.п.)
При пристальном внимании заметна разница в скорости загрузки xp (примерно на 15%).

Источник

Sil3132 windows 10 driver

Сообщения: 3791
Благодарности: 221

должно выглядеть так: после конфигурирования RAID1 все программы по разбивке диска и установка винды должны видеть 1 жесткий диск

ну так про конфигурирование ничего и не написано. А в остальном — все верно.
Может, с прошивкой связано, можно поменять на оригинальную — http://www.siliconimage.com

Пока собрался написать, уже наотвечали.