windows could not configure one or more system components.
Здравствуйте. Вылезло окошечко в правом нижнем углу,типо нужно обновиться до какой-то там версии Windows 10,но при обновлении мало того что обновляется дико долго до 40% жду около 1,5-2 часа,так еще и после 40% вылазит ошибка windows could not configure one or more system components.Windows restart the computer and then restar the installatoin, а потом компьютер перезагружается и все возвращается на круги своя. »Обновлялся» так уже 4 раза, все 4 раза такая же ошибка. Покопался в интернете у многих такая ошибка,но пути решения его нету. Очень надеюсь,что вы поможете мне с данной проблемой. Установлен Windows 10 версия 1803(сборка ОС 17134.950)
Ответы (3)
Это помогло устранить вашу проблему?
К сожалению, это не помогло.
Великолепно! Спасибо, что пометили это как ответ.
Насколько Вы удовлетворены этим ответом?
Благодарим за отзыв, он поможет улучшить наш сайт.
Насколько Вы удовлетворены этим ответом?
Благодарим за отзыв.
Здравствуйте. Вылезло окошечко в правом нижнем углу,типо нужно обновиться до какой-то там версии Windows 10,но при обновлении мало того что обновляется дико долго до 40% жду около 1,5-2 часа,так еще и после 40% вылазит ошибка windows could not configure one or more system components.Windows restart the computer and then restar the installatoin, а потом компьютер перезагружается и все возвращается на круги своя. »Обновлялся» так уже 4 раза, все 4 раза такая же ошибка. Покопался в интернете у многих такая ошибка,но пути решения его нету. Очень надеюсь,что вы поможете мне с данной проблемой. Установлен Windows 10 версия 1803(сборка ОС 17134.950)
Пожалуйста попробуйте выполнить сброс Центра Обновлений, воспользовавшись статьёй Базы Знаний службы поддержки Microsoft «Исправление ошибок в Центре обновления Windows» https://support.microsoft.com/ru-ru/help/10164/fix-windows-update-errors .
Затем выполните очистку системы, чтобы освободить место на диске и удалить мусор, воспользовавшись статьёй Базы Знаний службы поддержки Microsoft «Освобождение места на диске в Windows 10» https://support.microsoft.com/ru-ru/help/12425/windows-10-free-up-drive-space
Если это не поможет, пожалуйста попробуйте удалить папку C:\$WINDOWS.
BT(если она есть).
Затем, остановить службу обновлений и полностью очистить содержимое папки c:\Windows\SoftwareDistribution\, не удаляя саму папку.
И, после этого, попробуйте ещё раз выполнить обновление.
не установить Win 7 x64
Добрый.
Железо новое куплено два дня назад ..
core i3 3220, ASUS P8B75-M B75 , DDR3 4GB 1333 MHz Silicon Power две планки, HDD 3.5″ 500Gb WD 5400-7200 об/хв, 64 MB, SATA III, Caviar Green, Logicpower 520W MSI GeForce GTX650 1024Mb
на моменте когда запускаютсо службы летит ошибка
Windows could not configure one or more system components.To install Windows, restart the computer and then restart the instalation.
ну лили летит синий экран
BSOD 0x00000116 Win 7×64/Win 8.1 x64
После покупки ССД решил поставить систему на него. Установил Win 8.1 x64 и все драйверы после.
Зачастили BSOD на win 7 x64
Здравствуйте уважаемые форумчане, в последнее время(а именно 3 недели) довольно часто я стал видеть.
BSOD 0x000000d1 Win 7 x64
Всем привет, прикупил тут себе немного нового железа, теперь мучает BSOD 0x000000d1. Насколько я.
Экран смерти win 7 x64
Приветствую! На голый жесткий диск, после форматирования установил windows 7 x64 с оригинального.
Да мамка UEFI , биос с возможностью управления мышкой
Добавлено через 22 минуты
сейчас дотестирую оперативу и попробую как написано в мануале .
но что-то мне подсказывает — это не решит проблему .
за ссылку Спасибо . ибо за UEFI не имел никакой инфы . да и биос такой вижу впервые .
жду еще какой полезной инфы
Добавлено через 1 минуту
кста когда ставил Хрюшу UEFI то в выборе небыло . а ОСь не грузитсо тоже .
блин и решить чето надо побыстрее чтоб понять че менять по гарантии .
Добавлено через 28 минут
кстати а почему у меня когда гружусь с paragon флешки .. в обычном режиме винт не видно вообще .
только когда в безопасном режиме гружусь парагоном тады видно .
Добавлено через 3 часа 25 минут
Знач так .. память протестил мемтестом .. ошибок нет ))
сделал все как в мануале. предложенном выше ..
и вот результат — ^_^ :
есть какие еще мысли ?))
GUID Partition Table (GPT) is a boot sector technology poised to replace the venerable Master Boot Record (MBR) principally because MBR has a maximum capacity of 2 TB for a single partition (some single disks have reached 3 TB). Installing Windows on a GPT is a bit tricky because Windows wants to default back to MBR. In order to force Windows on to a GPT, we have to pre-format the drive prior to Windows installation. You can do that during Windows setup using the console.
Requirements
• Windows Vista or 7 (must be 64-bit no matter which OS is used)
• A motherboard with EFI BIOS
• A means to EFI boot the Windows setup (I had to use a USB DVD drive on MSI Z77A-G65, the internal SATA Bluray drives didn’t have an EFI option)
Instructions
1. Boot into Windows setup using EFI. On the MSI Z77A-G65, it showed up as UEFI:USB-ATAPI DVD . This will change according to your motherboard and how you are attempting to enter setup. This step is critical. Without booting into setup via EFI, only MBR is available to the setup. There’s no easy way to tell from within setup if it is running via EFI or not.
2. Once you have booted into setup, continue through the process as you would normally until you reach the dialog which shows you the available drives. Load a driver, if necessary, then press SHIFT+F10 to open the command prompt.
3. In the command prompt, enter the following lines, pressing enter after each one. Note that the field below is the disk ID that you want to format as GPT from the «list disk» command. If there’s only one drive, will likely be 1. Note: All data on the drive will be lost during this process. Make sure to select the correct drive.
1. diskpart
2. list disk
3. select disk
4. online disk
5. attributes disk clear readonly
6. clean
7. convert gpt
8. create partition efi size=102
9. create partition msr size=32
10. create partition primary
11. format fs=ntfs label=»Operating System»
12. assign letter=C
13. exit
«online disk» and «attributes disk clear readonly» are likely to fail. Don’t worry, they are only precautionary. Change the drive letter and label to whatever you want. Also, the above command (specifically «create partition primary») will consume all remaining space on the drive. If you want multiple partitions with fixed sizes, substitute what you want in place of «create partition primary.»
4. You may now close the command prompt and click on «Refresh» back in the dialog to choose where to install Windows. You should now see at least 2 partitions (I think Microsoft Reserved is hidden) and it will only let you install on a non EFI/MSR partition. Click on the primary partition and proceed with the installation as normal.
5. Note that in the EFI BIOS after installing Windows via EFI, you can no longer directly boot the volume Windows is installed on. Instead, you must boot via «Windows Boot Manager» (on MSI Z77A-G65, it was «UEFI: Windows Boot Manager»). Keep that in mind if you wish to tweak the boot order
пробовал . не решает проблему ..
кстати если пытаюсь выполнил команду Chkdsk/f/r
пишет что не возможно и диск защищен от записи ))
эт как вообще ??
в биосе защита не стоит ..
Добавлено через 10 минут
Типичные процедуры с Bios настройками пробовал всякие .
Хрюша сп3 на моменте когда должен загрузитсо рабочий стол тоже улетает в синий экран и ребут ..
все значения по дефолту тож ставил .
сегодня попробую поставить свой HDD на другую машину и установить винду .
мозг взорван . такого бреда я еще не видел ..
подключил всех знакомых . они тоже в ауууу . е
Добавлено через 5 часов 8 минут
Ребят вставил винт в другой комп и установил win7x64 .
стала себе прекрасненько .
после засунул его к себе в системник и о чудо .. все заработало .
щаз буду ставить дрова . че это было вообще не понимаю ..
но если при переустановке винды мне постоянно нада будет дергать винт и идти к другу винду ставить — это явно огниво )))
Добавлено через 6 часов 0 минут
Вообщем так .
винда то встала . Но
при копировании, распаковке zip, установке дров . постоянно вылетают ошибки или синий экран ..
второй раз протестил memtest память .. все ок . тестил винт викторией . написало все Good .
неужели мамка так вот глючит новая .
Windows could not configure one or more system components. To install Windows, restart the computer and then restart the installation
While updating from W10-1803 to 1809 I received the following error message at 52% of the installation process : » Windows could not configure one or more system components. To install Windows, restart the computer and then restart the installation». UNFORTUNATELY, NOTHING TELLS ME WHICH SYSTEM COMPONENTS COULD NOT BE CONFIGURATED !
After the OS completed the return to the 1803 version, I restarted the computer with a plugged-in mouse and I disabled McAfee, and then restarted the installation but it failed again at the same place.
After that 2nd attempt, Windows update didn’t show the 1809 update anymore so I ran the troubleshooting routine to check Windows update. It showed an error (…..still occupied on a process…). I think it’s the double failure in installing 1809.
A few weeks later I received update KB4023057 without any problem. I thought this had fixed Windows update (no more error message on Windows update) so I reloaded update 1809 from Microsoft. It downloaded ok but the installation failed again at the 52% mark.
This time I did not try to reinstall it because I want to pinpoint the problem before wasting more time and internet money. I ran the troubleshooting routine on Windows update and it is still ok.
These major W10 updates are very annoying because they can pup-out at any moment and slow down a machine for 4 to 6 hours. If you have limited internet like me, the 3-5Go can bust your maximum capacity if it appends at the end of your contract period and you have no time to buy more capacity. For these reasons, I prefer to «look for updates» when I’m ready or when it’s possible.
My computer is a Toshiba A660 laptop (Intel i5 CPU and 4Go RAM). Except the Logitech mouse, it is as it was out of the factory and it is mostly loaded with Big Fish games.
I want to say here that I successfully updated to 1809 on my 2 other machines (a Asus desktop PC and an other Toshiba laptop witch is a much lower size C650D model with much complicated applications that in the A660).
While looking for a solution on MS support forum I realised this problem as been encountered by many people trough the years since the beginning of major updates to W10. Like most of the people I ran the troubleshooting tests that were recommended without any problem being reported :
sfc /scannow
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /CheckHealth
I’ve seen a lot of other solutions proposed on the net to bypass that error but it’s too much abracadabra_ hocus pocus_registry tampering for me.
Could somebody tell me if there is a simple solution to this problem and/or if it will eventually be corrected by an update because this is getting very frustrating.
***moved on english forum****