Windows will continue to check for memory problems until you choose to exit
Windows 7 автоматически (так же, как и Windows Vista и Windows 8) обнаруживает возможные неисправности в памяти ПК и запрашивает разрешение на запуск Средства диагностики памяти Windows, но можно протестировать память и «вручную».
Запуск Средства диагностики памяти Windows вручную
Запустить Средство проверки памяти Windows можно разными способами, например:
• нажмите кнопку Пуск –> в текстовое поле Найти программы и файлы начните вводить оператив (оперативная) –> нажмите ссылку Диагностика проблем оперативной памяти компьютера;
• нажмите кнопку Пуск –> в текстовое поле Найти программы и файлы начните вводить памя (память) –> правой кнопкой мыши нажмите ссылку Средство проверки памяти Windows;
– введите пароль, если появится соответствующий запрос;
• нажмите кнопку Пуск –> в текстовое поле Найти программы и файлы введите mdsched –> правой кнопкой мыши нажмите ссылку mdsched;
– из контекстного меню выберите Запуск от имени администратора;
– в окне Средство проверки памяти Windows выберите один из двух вариантов запуска диагностики:
· Выполнить перезагрузку и проверку (рекомендуется);
· Выполнить проверку при следующем включении компьютера;
– после перезагрузки Windows начнется проверка оперативной памяти;
– появится окно Windows Memory Diagnostics Tool (Средство проверки памяти Windows) с сообщением
Windows is checking for memory problems…
This might take several minutes
Overall test status …
Status: No problems have been detected yet.
Although the test may appear inactive at times, it is still running.
Please wait until testing is complete…
Windows will restart the computer automatically. Test results will be displayed again after you log on.
– при этом индикатор выполнения показывает состояние процесса диагностики оперативной памяти;
– дождитесь завершения тестирования (если по каким-либо причинам вам нужно прервать диагностику, нажмите клавишу Esc);
– после завершения теста происходит автоматическая перезагрузка Windows;
– результаты тестирования оперативной памяти будут показаны после перезагрузки: в области уведомлений Панели задач появится окно Средство проверки памяти Windows с сообщением о результатах проверки (например: «Ошибки памяти не обнаружены»):
Если обнаружены ошибки памяти компьютера, обратитесь в магазин, где вы купили оперативную память (или ПК в сборе). К сожалению, обращение к продавцу не всегда – увы! – гарантирует замену неисправного модуля оперативной памяти или возврат денег…
Кстати, Microsoft при обнаружении ошибок оперативной памяти рекомендует обращаться «к изготовителю памяти или компьютера для получения информации, необходимой для устранения ошибки».
Дополнительные параметры запуска Средства диагностики памяти Windows
Рекомендуется запускать Средство диагностики памяти автоматически (с параметрами по умолчанию).
Опытные пользователи могут изменять параметры диагностики.
Для этого при запуске Средства диагностики памяти Windows нажмите клавишу F1.
– в открывшемся окне Windows Memory Diagnostics Tool (Средство диагностики памяти Windows) можно изменить следующие параметры:
• Test Mix. (Набор тестов) – Basic (Базовый), Standard (Обычный), Extended (Расширенный). По умолчанию выбран Standard;
• Cache (Кэш) – Default (Умолч.), On (Вкл.), Off (Выкл.). Default – использование кэша по умолчанию для всех тестов;
• Pass Count (Число проходов) – 0 – 99. По умолчанию – 2. Если выбрать 0, то будет бесконечное число проходов;
– для перехода к следующему параметру используйте клавишу Tab (для возврата к предыдущему экрану нажмите клавишу Esc);
– задав параметры, нажмите клавишу F10 для запуска тестирования памяти.
Примечания
1. Средство диагностики памяти Windows (Windows Memory Diagnostics Tool) представлено файлом MdSched.exe (\Windows\System32\; 143КБ).
2. Перед запуском Средства диагностики памяти Windows предварительно сохраните работу и закройте открытые программы и файлы.
Memory problems.
Technical Level : Basic
Memtest is easy to use and is an accurate test of your computer memory.
It can tell you if your memory is bad, a motherboard slot is bad etc.
Please note it takes a fair amount of time to run the required 6-8 passes.
Overnight is often best.
Memtest is better than the built in memory tester because it tests outside the Windows environment thus eliminating everything else.
1. Download Memtest here and follow the instructions to burn it to a CD. It will also work if burned to a bootable USB drive.
2. Burn the downloaded image to a CD or bootable USB drive
3. Boot from the Memtest media and start running it.
4. Yours should look like this. (no errors)
5. Let the first pass run and observe the report after the first pass.
There should no errors.
If there are it will look like this
6. If no errors, continue running the other 7 passes.
7. If at the end of 8 passes there are no errors you can be fairly sure your memory is working correctly.
Any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.
Test the sticks individually, and if you find a good one, test it in all slots.
Any errors are indicative of a memory problem.
If a known good stick fails in a motherboard slot it is probably the slot.
If you do have errors be sure to revert back to the default timing for your ram.
You can confirm this by moving that stick to another slot. If the result is the same it is the memory, if it is different it is the slot.
Don’t overclock, or undervolt it until the errors have stopped.
Similarly, if you are overclocking in general, revert back to default for the duration of these tests
Should you have a question about this topic please ‘Ask the Community.’
If this wiki has proved helpful please click me too at the bottom of the wiki.
Other Wiki’s you may be interested in
Test System Memory for Errors in Windows 10, 8 or 7
While using the computer you may encounter system memory errors, and this guide will show you how to use a special memory-checking utility integrated into Windows 10, 8 or 7.
If programs work very slowly or with errors, if you see various glitches or freezes in Windows, if the system restarts suddenly, shows BSOD errors, it becomes a challenging task to find the root of the problem. Such errors can be cause by both software and hardware issues.
System memory is the component that you can check quickly and easily. In case there are problems with one of the memory modules, you should replace it immediately to restore your computer’s performance back to normal and avoid more serious problems connected to damaging system or user files.
In spite of third-party utilities for the same purpose available for download from the Internet, operating systems Windows 10, 8 and 7 have an integrated tool for checking the system memory. In this guide we will learn to use the Windows memory diagnostic tool to check if there are any problems with a memory module.
How to Detect Memory Problems in Windows 10
To perform the following steps, you should restart the computer, so close all files which are opened and exit all running applications. Then:
Open Control Panel.
Choose System and Security.
Go to Administrative Tools.
Double-click the Windows Memory Diagnostic shortcut.
An important note: As an alternative, you can use the keyboard shortcut Windows + R, then enter mdsched.exe and click ОК to run this tool.
Click the Restart now and check problems option. (The utility also offers to schedule a test after the next restart if you can’t close your applications and restart right now).
After the restart, the computer will automatically start in the Windows Memory Diagnostics environment and will run a standard test. The utility will run all tests available in the basic mode, as well as LRAND, Stride6 (cache enabled), CHCKR3, WMATS + and WINVC.
You can wait till the end of the Standard test, or you can press the F1 button to change the scan options.
On the Options page, you can change the scan mode to Basic, which runs the MATS+, INVC, and SCHCKR (cache enabled) tests.
Alternatively, you can also select the Extended mode which includes all tests available in the Standard mode, plus MATS+ (cache disabled), Stride38, WSCHCKR, WStride-6, CHCKR4, WCHCKR3, ERAND, Stride6 (cache disabled), and CHCKR8.
If necessary, you can navigate the settings using the TAB key to change cache settings. If you disable cache, the utility will be able to address RAM data directly which ensures you run a comprehensive test. Besides, you can also set how many times the scanning will be repeated to test memory modules within your system.
Press F10 to apply the settings, go back to the main page and start a new scan.
Checking Test Results
You can see the status while the scan is running, but as soon as the test is over, the computer will restart automatically. You will have to use the Event Viewer tool to see the test results and understand whether you have a faulty RAM module or not.
Type in eventvwr.exe and press Enter to open Event Viewer.
Go to the folder Windows Logs / System.
Right-click on System and select Find.
Enter MemoryDiagnostics-Results, and click the Find Next button.
Close the Find dialogue window.
In the Event Viewer, double-click on the MemoryDiagnostics-Results source, and view the message. If it says “The Windows Memory Diagnostic tested the computer’s memory and detected no errors,” then you can rest assured that memory is not the root of the problem.
If the results show one or several errors, you can try running an extended memory test and check the results again. If you still see at least one error, then one of your RAM modules may be faulty and you might have to replace it.
Sometimes the tool can show you which memory stick has problems showing the results. However, if it cannot provide this information, you may have to remove and test your RAM sticks one by one to find the faulty one.
Though we use this guide for Windows 10, the Windows memory diagnostic tool has been around for many years, and it means you can use it in earlier versions of Windows as well, including Windows 8.1 and Windows 7.