Windows xp internet explorer cannot display the webpage

SOLVED: Internet Explorer cannot display the webpage

They are still a large number of users using Internet Explorer, and many of them have reported getting the error Internet Explorer cannot display the webpage. when they try to access a website on IE. This error stops Internet Explorer from accessing any websites. Since the error doesn’t tell why it is not able to open the site, we’ll have to make some assumptions and proceed forward with it’s troubleshooting. The issue behind this error can be a software issue isolated to the internet explorer or a connectivity issue therefore affecting your whole system.

Before you go ahead with the methods below, make sure that your Internet Connection is WORKING , and there are no VPNs running on your system, also it would be best to disable any antivirus or firewall software you are running until the issue is fixed. The methods listed in this guide are in the most worked order to save you time and energies. If the issue is fixed at by any Method, then you don’t need to go ahead with the other methods.

Method 1: Reset Internet Explorer

This will reset all settings and custom options set in Internet Explorer. Your bookmarks will not be deleted.

Hold the Windows Key and Press R. In the Run Dialog, type inetcpl.cpl and Click OK.

Click on the Advanced tab. Click on the Reset button below. Place a check next to Delete Personal Settings and click Reset. Internet Explorer will now be reset to its default settings.

After the Internet Explorer has been resetted, re-open it and test. To restore Bookmarks Bar, hold the CTRL + SHIFT + B keys.

Method 2: Verify Proxy Settings

Invalid proxy settings can cause internet explorer to deviate from the right path, thus giving this error. To verify the settings. Close Internet Explorer.

Hold the Windows Key and Press R. In the Run Dialog, type inetcpl.cpl and Click OK.

Go to the Connections tab. Once on the tab, click on the LAN settings button.

Make sure there is a check next to Automatically detect settings and the other two checkboxes are unchecked.Click OK and close all windows. Restart Internet Explorer.

Method 3: Check IP Address

IP Address conflicts and incorrect settings can restrict access to the Internet, which can also trigger the “cannot display webpage” error. To fix it,

Hold the Windows Key and press R. In the run dialog type ncpa.cpl and Click OK.

Right click on Local Area Connection if you are using Wired Connection or Right click on Wireless Network Connection if you are using Wi-Fi. Click on Properties in the drop down menu.

Double click on Internet Protocol Version 4 (TCP/IPv4). Select Obtain an IP address automatically. Select Obtain DNS server address automatically. Click OK > OK and close all windows. Restart your system. If the problem still persists, move on to the next solution.

Method 4: Reboot Router/Modem

You router may have a glitch with establishing a connection with your ISP. However, if your other devices such as smart-phones, tablets and other computers etc are connected to internet via Wi-Fi or Ethernet to this router, then the router is getting the internet. A reboot of the router is still preferred.

To do this, Turn off your router and unplug it from the power adapter.

After 30 seconds, plug the adapter back into your router and turn it on.

Now test and see if the issue is fixed.

Method 5: Reset Windows Socket TCP/IP Stack

Windows socket is the program responsible for handling all the network incoming and outgoing requests by program like Internet Explorer. If there is an issue with it, resetting it can fix it easily.

To do so, press Windows key and type cmd, right click cmd and choose Run as administrator.

In the black command prompt window, type the following commands and press Enter after each:

nbtstat -R

nbtstat -RR

netsh int reset all

netsh int ip reset

netsh winsock reset

Reboot your system for changes to take effect.

Method 6: Disable Enhanced Protected Mode (For Windows 8)

In Windows 8, Enhance Protected mode was added to Internet explorer 10 which increases security but is known to cause such kind of browsing issues.

Источник

Internet Explorer cannot display the webpage

There are many reasons that Internet Explorer could be encountering this issue. Some examples are connectivity to your ISP, a firewall blocking your connection, or your networking device not functioning properly. Here are some things that you can try:

Method 1: Run the Network Diagnostics tool in Internet Explorer

1. Start Internet Explorer, and then try to access the Web page that is displaying the error message.

2. On the page that displays an Internet Explorer error message, click the Diagnose Connection Problems link. The Network Diagnostics tool will run. When the tool has finished running, it will report one of the following results:

1. • It was unable to find a problem.
   • It has detected a problem. Additionally, the tool will provide guidance about the next steps to take to troubleshoot the problem.

3. Click IP Address , and note the IP Address. You may need it for future troubleshooting.

4. Follow the steps in the Network Diagnostics tool to fix any connection problems.

5. Start Internet Explorer.

If you receive the same error message, go to the next method.

Method 2: Reset the modem or the router

1. Disconnect the cable that connects the computer to the modem.

2. Turn off the modem and the router.

Note: If the modem or the router does not have a power switch, disconnect the power to the modem or to the router.

3. Restart the computer.

4. After your computer has restarted, turn on the modem or the router, connect the cable from the computer to the modem or the router, and restart the computer.

5. Make sure that all network cables are securely connected.

6. Start Internet Explorer.

If you receive the same error message, go to the next method.

Method 3: Use the Delete Browsing History feature

If resetting the modem or the router did not resolve the problem, deleting your browsing history might help. Follow these steps to remove your temporary Internet files, history, and form data:

1. Start Internet Explorer.

2. Click the Safety button, and then click Delete Browsing History .

3. Select the check box next to each category of information you want to delete.

4. Select the Preserve Favorites website data check box if you do not want to delete the cookies and files associated with websites in your Favorites list.

5. Click Delete. (This could take awhile if you have a lot of files and history.)

6. Close Internet Explorer, start Internet Explorer again, and then try to access the Web page.

If you receive the same error message, go to the next method.

Method 4: Use the Internet Explorer (No Add-ons) mode

1. To do this, click Start , point to All Programs , point to Accessories , point to System Tools , and then click Internet Explorer (No Add-ons) .

If this resolves the issue, follow these steps to isolate the browser add-on that is causing the issue:

1. Click Tools , and then click Internet Options .
2. Click the Programs tab, and then click Manage add-ons .
3. Click an add-on in the Name list, and then click Disable .
4. Repeat step 3 until you identify the add-on that is causing the issue.

If the methods above did not resolve your issue, you can try advanced troubleshooting methods. For advanced troubleshooting, see You receive an error message in Internet Explorer: «Internet Explorer cannot display the webpage». (http://support.microsoft.com/kb/956196)

21 people were helped by this reply

Did this solve your problem?

Sorry this didn’t help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.

I would set Windows Updates to only tell you updates are available and let you install them selectively.

Contol Panel — Windows Updates — on upper left Change Settings.

Also set Driver Updates to not install and HIDE them when they are suggested.

Those methods should help you discover the cause of your issue or at least stop it from happening again.
See last two entries in the methods below to see why and how.

This is my generic how to for proper driver updates :

This utility makes it easy to see which versions are loaded :

DriverView — Free — utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,
version, product name, company that created the driver, and more.
http://www.nirsoft.net/utils/driverview.html

For Drivers check System Maker as fallbacks and Device Maker’s which are the most current.
Control Panel — Device Manager — Display Adapter — write down the make and complete model of your
video adapter — double click — Driver’s tab — write down the version info. Now click UPdate Driver (this
may not do anything as MS is far behind certifying drivers) — then Right Click — Uninstall — REBOOT
this will refresh the driver stack.

Repeat that for Network — Network Card (NIC), Wifi, Sound, Mouse and Keyboard if 3rd party with their
own software and drivers and any other major device drivers you have.

Now go to System Maker’s site (Dell, HP, Toshiba as examples) (as rollback) and then Device Maker’s site
(Realtek, Intel, Nvidia, ATI as examples) and get their latest versions. (Look for BIOS, Chipset and software
updates at System Maker’s site while there.)

Download — SAVE — go to where you put them — Right Click — RUN AD ADMIN — REBOOT after each installation.

Always check in Device Manager — Drivers tab to be sure the version you are installing actually shows up. This
is because some drivers rollback before the latest is installed (sound drivers particularly do this) so install a
driver — reboot — check to be sure it is installed and repeat as needed.

Repeat at Device Makers — BTW at Device Makers DO NOT RUN THEIR SCANNER — check manually by model.

Manually look at manufacturer’s sites for drivers — and Device Maker’s sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

If you update drivers manually then it is a good idea to disable Driver Installations in Windows Updates,
this leaves Windows Updates ON however it will not install drivers which will usually be older and cause
issues. If Updates suggests a new driver then HIDE it (Right Click on it) and then go look for new ones
manually if you wish.

Источник

Причины ошибки «Не удается отобразить эту страницу» в IE

Внезапно Internet Explorer может перестать подключаться к интернету. Причины могут быть разными, но проблема одна – ошибка «Не удается отобразить эту страницу». Рассмотрим известные причины возникновения ошибки и методы их решения.

Физическая причина

Проверьте наличие подключения к сети в Windows. Если оно отсутствует, проверьте подключение кабеля к LAN-разъему компьютера или маршрутизатора. В случае с маршрутизатором, можно попробовать его перезагрузить.

Адрес

Если невозможно зайти на какой-то конкретный сайт, потому что не удается отобразить страницу, проверьте правильность введенного адреса. Если сайт использует протокол https, проверьте активность протоколов SSL и TSL:

1. Нажмите на кнопку «Сервис».
2. Выберите пункт «Свойства», а затем «Дополнительно».
3. Проверьте наличие флажков возле всех версий SSL и TSL.
4. Поставьте недостающие флажки и перезагрузите браузер.

Неправильные настройки браузера

Быстрое решение проблемы – сброс настроек к начальному состоянию. Процесс выполняется следующим образом:

1. Закройте все вкладки IE.
2. Нажмите на кнопку «Сервис».
3. Перейдите в «Свойства обозревателя».
4. Во вкладке «Дополнительно» нажмите на «Сброс».

1. В появившемся окне подтвердите действие нажатием на «Сбросить».
2. Дождитесь окончания установки.
3. Закройте окно и нажмите ОК.
4. Перезагрузите компьютер

Обратите внимание, процедура сбрасывает не только настройки, но и полностью очищает историю и закладки. Вернуться к старым настройкам уже невозможно.

Конфликт дополнений

Некоторые дополнения Internet Explorer, например, элементы панели инструментов, могут конфликтовать друг с другом. Ошибка может возникнуть и в случае повреждения дополнения. Обычно такое случается из-за прерывания процесса установки аддона.

Проверить наличие такой проблемы можно в режиме «Без надстроек» IE:

1. Откройте меню «Пуск».
2. Нажмите на «Все программы».
3. Перейдите по пути «Стандартные / Системные инструменты».
4. Найдите и запустите Internet Explorer (без надстроек).

Если браузер отображает страницы корректно в этом режиме, значит, проблема в дополнениях. Удаляйте их по очереди и проверяйте работу браузера.

Вирусы

Вирусное программное обеспечение может вызывать сбои не только в работе браузера, но и всего компьютера. Лучшее решение проблемы – просканировать систему любым современным антивирусом.

Устаревшая версия браузера

Интернет развивается стремительно, каждый год появляются новые решения в Web-среде. Старые версии Internet Explorer могут иметь проблемы совместимости с новыми стандартами. Решение – обновление браузера.

Для IE 9 процедура следующая:

1. Запустите Internet Explorer.
2. Нажмите кнопку «Пуск».
3. Введите «Update» в поисковую форму.
4. Выберите «Центр обновления Windows».
5. Слева нажмите на «Проверить наличие обновлений».
6. Следуйте инструкциям на сайте Microsoft.

В ранних версиях IE порядок действий такой же, но «Центр обновлений» расположен в меню «Сервис» браузера.

Рендеринг графического процессора

Актуально для старых компьютеров, которые не обладают мощной видеокартой:

1. Запустите браузер.
2. Перейдите в «Сервис / Свойства».
3. Во вкладке «Дополнительно» найдите «Accelerate Graphics».
4. Выберите пункт «Использовать программный рендеринг вместо GPU».
5. Нажмите «Применить», затем «ОК».
6. Перезапустите браузер.

Закрыт протокол 443

Перейдите на любой сайт, который всегда использует https. Например, mail.google.com. Если появляется ошибка – порт закрыт. Решение – сброс настроек протокола TPC/IP. Этим лучше не заниматься самостоятельно, это вотчина системных администраторов.

Что делать, если в браузере не открываются никакие сайты? Ответ в следующем видео:

На сегодня все. Есть вопросы, пишите в комментарии. Всем пока!

Источник